Reverse this procedure to install the processor.
Display assembly
NOTE:
The display assembly spare part kit includes webcam, two microphones, and wireless
antenna transceivers and cables).
Description
Spare part number
17.3-in, HD, LED, BrightView display assembly (includes webcam, two microphones, and wireless antenna transceivers
and cables)
In butter gold finish
640223-001
In charcoal gray finish
640226-001
In luminous rose finish
640225-001
In ocean drive finish
640224-001
In Pacific blue finish
640221-001
In pearl pink finish
640228-001
In pewter finish
640227-001
In Sonoma red finish
640220-001
In sweet purple finish
640222-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 47
), and then remove the following components:
●
Optical drive (see
Optical drive on page 49
)
●
Hard drive (see
Hard drive on page 51
)
●
WLAN module (see
WLAN module on page 55
)
●
Keyboard (see
Keyboard on page 57
)
●
Top cover (see
Top cover on page 61
)
Component replacement procedures
93
