background image

Item

Component

Spare part number

 

For use only with computer models equipped with an AMD Athlon, Phenom, Turion, or
V-series processor and a graphics subsystem with 1024-MB of discrete video memory

638855-001

 

For use only with computer models equipped with an AMD Athlon, Phenom, Turion, or
V-series processor and a graphics subsystem with 512-MB of discrete video memory

638854-001

 

For use only with computer models equipped with an AMD Athlon, Phenom, Turion, or
V-series processor and a graphics subsystem with UMA video memory

638856-001

 

For use only with computer models equipped with an Intel processor:

 

For use only with computer models equipped with the Intel HM65 chipset and a
graphics subsystem with 1024-MB of discrete video memory and supports bus alive/
chip off (BACO)

650199-001

 

For use only with computer models equipped with the Intel HM65 chipset and a
graphics subsystem with 512-MB of discrete video memory and supports bus alive/
chip off (BACO)

650198-001

 

For use only with computer models equipped with the HM65 chipset and a graphics
subsystem with 1024-MB of discrete video memory

636375-001

 

For use only with computer models equipped with the HM65 chipset and a graphics
subsystem with 512-MB of discrete video memory

636374-001

 

For use only with computer models equipped with the HM65 chipset and a graphics
subsystem with UMA video memory

636373-001

 

For use only with computer models equipped with the HM55 chipset and a graphics
subsystem with 1024-MB of discrete video memory

636372-001

 

For use only with computer models equipped with the HM55 chipset and a graphics
subsystem with 512-MB of discrete video memory

636371-001

 

For use only with computer models equipped with the HM55 chipset and a graphics
subsystem with UMA video memory

636370-001

 

Equipped with an Intel Core i3-370M 2.40-GHz processor (3.0-MB L3 cache,
dual core, 35 W), the HM55 chipset, and a graphics subsystem with 1024-MB of
discrete video memory

654117-001

 

Equipped with an Intel Core i3-370M 2.40-GHz processor (3.0-MB L3 cache,
dual core, 35 W), the HM55 chipset, and a graphics subsystem with UMA video
memory

654118-001

 

Thermal Material Kit

 (includes replacement thermal paste and pads)

634433-001

(14)

Processor

 (includes replacement thermal material)

 

AMD A8-3500M 2.40-GHz processor (1.5-GHz FSB, 4.0-MB L2 cache,
quad core, 35 W)

653350-001

 

AMD A6-3400M 2.30-GHz processor (1.4-GHz FSB, 4.0-MB L2 cache,
quad core, 35 W)

653349-001

 

AMD A4-3300M 2.50-GHz processor (1.9-GHz FSB, 4.0-MB L2 cache,
dual core, 35 W)

653348-001

 

AMD Athlon II P360 2.30-GHz processor (1.0-MB L2 cache, 1066-MHz, 3.2GT/sec,
dual core, 25 W)

636635-001

Computer major components

23

Summary of Contents for Pavilion g7







































































































































Reviews: