4
Updated HP Media Center PC Information
Filename: s3adepc.doc Title: Self Cover [short version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 19 Page: 4 of 20 Printed: 12/12/02 10:22 AM
Select PCs have the multi-channel audio capability
that uses the microphone, Audio (Line) In, and
Audio (Line) Out connectors on the back of the
PC. If your PC has these connectors, perform the
procedure “Installing multi-channel audio
speakers“ on page 4 of this document.
Installing Creative Audigy for speakers
After you turn on the PC for the first time and
complete the initial onscreen setup, do the
following so that your speakers work properly:
1
Close any open programs.
2
Click
Start
on the taskbar, choose
All
Programs
,
Creative
, and then click
Install
Application for Creative Audigy
.
3
The Audigy Application Setup window opens.
Click
OK
.
The InstallShield Wizard begins the installation
and automatically restarts the PC when the
installation completes.
Note:
If you do not do this procedure, the speakers may
produce an audible pop when the PC wakes from
standby or hibernation.
Installing multi-channel audio speakers
If your PC has multi-channel speakers capability
(select models only), you can connect speakers for
4-channel or 6-channel output. You must connect
your speaker system to the PC, and then configure
the audio software for sound output.
Note:
Multi-channel audio uses the Microphone,
Audio (Line) In, and Audio (Line) Out connectors
on the back of the PC to connect the multi-channel
speakers system to the PC.
To connect your multi-channel
speaker system to the PC
1
Turn off the PC.
2
Connect the three audio cable plugs from the
speaker system to the connectors on the back
of the PC (see the table).
Summary of Contents for Pavilion Media Center 884
Page 1: ...hp media center pc updated hp media center pc information ...
Page 20: ......