4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the four Phillips M3.0×3.5 screws (1) from the bracket.
b.
Remove the bracket
(2)
from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Power button board
Description
Spare part number
Power button board (includes cable)
734416-001
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 42
), and then remove the following components:
a.
Optical drive (see
Optical drive on page 48
)
b.
Service door (see
Service door on page 43
)
c.
Keyboard (see
Keyboard on page 54
)
d.
WLAN module (see
WLAN module on page 46
)
e.
Memory module (see
Memory module on page 44
)
f.
Top cover (see
Top cover on page 59
)
66
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Pavilion TouchSmart Notebook PC
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
