6.
Remove the TouchPad button board
(5)
.
Reverse this procedure to install the TouchPad button board.
Optical drive connector cable
NOTE:
The optical drive connector cable is included with the Optical Drive, spare part number
734415-001.
Before removing the optical drive connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 42
), and then remove the following components:
a.
Optical drive (see
Optical drive on page 48
)
b.
Service door (see
Service door on page 43
)
c.
WLAN module (see
WLAN module on page 46
)
d.
Memory module (see
Memory module on page 44
)
e.
Keyboard (see
Keyboard on page 54
)
f.
Top cover (see
Top cover on page 59
)
Component replacement procedures
69
Summary of Contents for Pavilion TouchSmart Notebook PC
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
