RTC battery
Description
Spare part number
RTC battery
697917-001
Before removing the RTC battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 42
), and then remove the following components:
a.
Optical drive (see
Optical drive on page 48
)
b.
Service door (see
Service door on page 43
)
c.
Remove the WLAN module (see
WLAN module on page 46
)
d.
Remove the Memory module (see
Memory module on page 44
)
e.
Keyboard (see
Keyboard on page 54
)
f.
Top cover (see
Top cover on page 59
)
g.
Hard drive (see
Hard drive on page 63
)
h.
System board (see
System board on page 71
)
Remove the RTC battery:
1.
Turn the system board upside down, with the front toward you.
2.
Use a flat-bladed, non-metallic tool
(1)
to release the RTC battery from the socket on the
system board. The battery is spring loaded and will pop up.
78
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Pavilion TouchSmart Notebook PC
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
