●
Regal purple
734412-001
●
Revolutionary blue
734411-001
●
Silver
734413-001
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 42
), and then remove the following components:
a.
Optical drive (see
Optical drive on page 48
)
b.
WLAN module (see
WLAN module on page 46
)
c.
Memory module (see
Memory module on page 44
)
d.
Keyboard (see
Keyboard on page 54
)
e.
Top cover (see
Top cover on page 59
)
f.
Hard drive (see
Hard drive on page 63
)
g.
System board (see
System board on page 71
)
Remove the display assembly:
1.
Remove the 5 Phillips PM2.5×6.5 screws
(1)
that secure the display assembly to
the base enclosure.
Component replacement procedures
89
Summary of Contents for Pavilion TouchSmart Notebook PC
Page 4: ...iv Important Notice about Customer Self Repair Parts ...
Page 6: ...vi Safety warning notice ...
Page 10: ...x ...
