Connector board
Table 5-10
Connector board spare part information
Description
Spare part number
Connector board (includes USB port and audio-out (headphone)/audio-in (microphone) combo jack)
L96503-001
Before removing the connector board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
), and then remove the following
components:bbsf
a.
Battery (see
)
b.
Solid-state drive (see
c.
Fan (see
d.
System board (see
Remove the connector board:
1.
Turn the system board upside down with the front toward you.
2.
Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect
the connector board cable from the system board.
3.
Remove the connector board (2) and cable.
Reverse this procedure to install the connector board and cable.
Component replacement procedures
65