Safety & Comfort Guide
7–7
Electrical and Mechanical Safety Information
Monitor Support Cover
Do not place a monitor with an unstable base or a monitor
heavier than the marked weight rating on top of a monitor
support cover or stand. Heavier monitors should be
placed on a work surface next to the docking base.
Rechargeable Battery Pack
Do not crush, puncture, or incinerate the battery pack or
short the metal contacts. In addition, do not attempt to
open or service the battery pack.
Docking Base
To avoid pinching your fingers, do not touch the rear of the
computer when docking it into a base.
Precautions for Server and Network
Products
In addition to the general precautions described earlier in
this chapter, be sure to observe the following precautions
when operating server and network products. Failure to
observe these precautions could result in fire, bodily
injury, and damage to the equipment.
Safety Interlocks and Enclosures
To prevent access to areas containing hazardous energy
levels, some servers are provided with safety interlocks
that disable the power supply when the enclosure cover is
removed. For servers provided with safety interlocks,
observe the following precautions:
❒
Do not remove enclosure covers or attempt to defeat
the safety interlocks.
❒
Do not attempt to repair accessories and options
inside interlocked areas of the system while operating.
Repair should be performed only by individuals who
are qualified in servicing computer equipment and
trained to deal with products capable of producing
hazardous energy levels.
Accessories and Options
Installation of accessories and options in safety
interlocked areas should performed only by individuals
who are qualified in servicing computer equipment and
trained to deal with products capable of producing
hazardous energy levels.