Setup Utility
Hardware and Software Guide
13–5
4. Access the system information on the
Main
and
Advanced
menus.
❏
To display most of the system information available in the
Setup utility, use the arrow keys to select the
Main
menu.
❏
To display video memory information, use the arrow keys
to select the
Advanced
menu.
5. To close the Setup utility without changing any settings, use
the arrow keys to select the
Exit
menu
> Exit Discarding
Changes,
and then press
enter.
(The notebook restarts in
Windows.)
Default Settings
The following procedure explains how to restore the Setup utility
default settings. If the notebook is not in the Setup utility, begin at
step 1. If the notebook is in the Setup utility, begin at step 3.
1. If you are not sure whether the notebook is off or in
hibernation, press the power button. (The notebook turns on
or restores from hibernation.)
2. Display the Setup message:
❏
If the notebook is on, restart the notebook through the
operating system.
❏
If you are certain that the notebook is off and not in
hibernation, turn the notebook on.
3. Press
f9.
4. When the Setup Confirmation is displayed, press
enter
to save
your preference.
5. To set your preference and exit the Setup utility, press
f10,
and then follow the instructions on the screen.
The Setup utility default settings are set when you exit the Setup
utility and are in effect when the notebook restarts in Windows.
Identification information, including ROM version information,
is retained.
