Power cable
The power cable spare part number is 741969-001.
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 27
).
5.
Remove the following components:
a.
Top cover (see
Top cover on page 29
)
b.
Power button board
c.
Display assembly
d.
Speaker assembly
e.
Hard drive (see
Hard drive on page 42
)
f.
System board
Remove the power cable:
1.
Position the system board upside-down.
2.
Disconnect the power cable from the bottom of the system board.
Reverse this procedure to install the power cable.
46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Pavilion10
