122
HP Photosmart M22/M23 User’s Manual
My image is
too dark
(continued)
.
There was not
enough light.
•
Use
Image Advice
(see
page 72).
•
Wait for natural lighting
conditions to improve.
•
Add indirect lighting.
•
Use the flash (see
page 40). This is called
fill-flash.
•
Increase the
EV
Compensation
(see
page 56).
•
Use
Adaptive Lighting
(see
page 52).
A light is behind
the subject.
•
Use the
Flash On
setting
(see
page 40) to brighten
the subject.
•
Increase the
EV
Compensation
(see
page 56).
•
Use
Adaptive Lighting
(see
page 52).
Your finger
blocked the
flash.
Be sure to move your fingers
away from the flash when you
take a picture.
The Display
Brightness
needs to be
adjusted.
Set the
Display Brightness
in
the
Setup Menu
to
Medium
or
High
(see page 94).
My image is
grainy.
The
ISO Speed
setting was too
high.
•
Use
Image Advice
(see
page 72).
•
Use a lower
ISO Speed
setting (see page 59).
Problem
Possible Cause
Solution
Downloaded From camera-usermanual.com HP Manuals
Summary of Contents for PhotoSmart M22
