HP Photosmart Premium Fax e-All-in-One Printer - C410 User Manual Download

Page: 171 / 264

Press the down arrow button to highlight

Fax Speed

, and then press

Press the down arrow button to select one of the following settings, and then press

Fax speed setting

Fax speed

Fast (33600)

v.34 (33600 baud)

Medium (14400)

v.17 (14400 baud)

Slow (9600)

v.29 (9600 baud)

Cause:

The

Fax Speed

setting might have been set too fast.

If this did not solve the issue, try the next solution.

Solution 2: Check for error messages on the display

Solution:

If an error condition exists that is preventing the product from printing

faxes, review the display for information on the error condition. Make sure:

•

The product is on. Press the

button to turn on the product.

•

The product is set up correctly for faxing. See the printed documentation for more
information.

•

There is paper loaded in the input tray.

•

There is no paper jam.

•

The print carriage is not stalled or blocked. Turn off the product, remove any
objects that are blocking the print cartridge carriage (including any packing
materials), and then turn on the product again.

•

The print cartridge door is closed. If not, close the print cartridge door, as shown
below:

NOTE:

If the product has an alignment message, you might be able to press the

button next to

to clear the message and resume faxing.

After you resolve any problems found, the product can begin answering incoming fax
calls.

Fax troubleshooting

169

Solve a problem

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for Photosmart Premium Fax e-All-in-One Printer - C410









































































































































































































































































Search results

Summary of Contents for Photosmart Premium Fax e-All-in-One Printer - C410

Reviews:

Related manuals for Photosmart Premium Fax e-All-in-One Printer - C410

Brands by name

Popular brands

HP Photosmart Premium Fax e-All-in-One Printer - C410, User Manual

Search results

Summary of Contents for Photosmart Premium Fax e-All-in-One Printer - C410

Reviews:

Related manuals for Photosmart Premium Fax e-All-in-One Printer - C410

Brands by name

Popular brands