84
HP Pavilion Plasma HDTV User’s Guide
No video
No audio
■
Check to see if the TV power cord is plugged into a
power outlet.
■
Try another channel in case of station trouble.
■
Ensure the remote control codes are properly
programmed.
■
Check cable connections.
■
Adjust brightness and audio controls.
■
Press the Source button to select the correct input
source.
■
Make sure a PC is not connected with an HDMI
input.
■
Unplug any HDMI connections and plug them
back in.
No color
Normal audio
■
Adjust the color settings.
■
Change the channel.
Digitalization of
image or image
freeze up
Audio break up
■
Reposition the ATSC (digital) antenna.
■
Check signal meter. If the signal is weak, add a
signal booster to boost the signal strength.
Normal video
Wrong audio
■
Verify that the audio mode is set to stereo or mono,
not SAP.
■
Check to see if there is a problem with the audio
setting for HDMI. If so, use analog audio.
■
Make sure the audio input matches the output. For
example, set the audio of HDMI to linear PCM.
Black box on
screen
Normal audio
■
Verify that the CC (Closed Caption) Analog settings
are set to something other than T1, T2, T3, or T4.
Normal video
Normal audio
■
Replace the remote control batteries.
Intermittent Remote Control Operation
Symptoms
Solutions
Video
Audio
mb5pohtv.book Page 84 Wednesday, July 6, 2005 9:52 AM