HP Pro 3340/3348, MT
670586-001
page 2
System Board
Standard and Optional Boards
Memory modules (PC3-10600, CL9)
*
1 GB
635802-001
*
2 GB
635803-001
*
4 GB
585157-001
Other boards
*
ATI Radeon HD 6350 512-MB graphics adapter
637995-001
*
ATI Radeon HD 6450 512-MB graphics adapter
637996-001
*
ATI Radeon HD 6450 1-GB graphics adapter, PCIe x16
666330-001
*
nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB, PCIe x16
632486-001
*
nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB, PCIe x1
632827-001
*
nVidia GeForce GT405 512-MB graphics adapter
657108-001
*
Intel Gigabit NIC, includes bracket
490367-001
Intel Core i7 processors (include thermal material)
*
2600, 3.4 GHz, 8-MB L3 cache
638632-001
Intel Core i5 processors (include thermal material)
*
2500, 3.3 GHz, 6-MB L3 cache
638631-001
*
2400, 3.1 GHz, 6-MB L3 cache
638630-001
Intel Core i3 processors (include thermal material)
*
2120, 3.3 GHz, 3-MB L3 cache
638629-001
*
2100, 3.1 GHz, 3-MB L3 cache
638628-001
Intel Pentium Dual-Core processors (include thermal material)
*
G850, 2.9 GHz, 3-MB L3 cache
655973-001
*
G840, 2.8 GHz, 3-MB L3 cache
655972-001
*
G620, 2.6 GHz, 3-MB L3 cache
655971-001
Intel Celeron Dual-Core processors (include thermal material)
*
G540, 2.5 GHz, 2-MB L3 cache
666892-001
*
G530, 2.4 GHz, 2-MB L3 cache
666891-001
*
G440, 1.6 GHz, 1-MB L3 cache
666890-001
* Not shown
Diagnostic LEDs
LED
Color
LED Activity
State/Message
Power
Green
On
Computer on
Power
Green
1 blink every 2 seconds
Normal Suspend Mode
Power
Red
1 blink every second followed
by a 2 second pause
CPU thermal shutdown
Power
Red
3 blinks, 1 blink every second
followed by a 2 second pause
Processor not installed
Power
Red
4 blinks, 1 blink every second
followed by a 2 second pause
Power failure (power supply overload)
Power
Red
5 blinks, 1 blink every second
followed by a 2 second pause
Pre-video memory error
Power
Red
6 blinks, 1 blink every second
followed by a 2 second pause
Pre-video graphics error
Power
Red
7 blinks, 1 blink every second
followed by a 2 second pause
System board failure (ROM
Power
Red
8 blinks, 1 blink every second
followed by a 2 second pause
Invalid ROM based on Checksum
Power
Red
9 blinks, 1 blink every second
followed by a 2 second pause
System powers on but is unable to boot
Power
Red
10 blinks, 1 blink every second
followed by a 2 second pause
Bad option card
Power
Red
11 blinks, 1 blink every second
followed by a 2 second pause
Current processor does not support a
feature previously enabled.
none
none
System does not power on and
LEDs are not flashing
System unable to power on
System Board Connectors and Jumpers (component location may vary)
ATX_CPU
CPU power connector
F_USB2
2nd USB connector
XU1
Processor socket
INT_SPRK
Speaker connector
CPU_ FAN
Heat sink fan connector
F_AUDIO
Front audio connector
XMM1
Memory socket - Channel A
PCI1
PCI expansion slot
XMM2
Memory socket - Channel B
PCI2
PCI expansion slot
XMM3
Memory socket - Channel A
PCIEX1
PCIe x1 expansion slot
XMM4
Memory socket - Channel B
PCIEX16
PCIe X16 expansion slot
ATX_POWER
Main power connector
SPDIF_OUT1
S/PDIF audio connector
HOOD_SENSE
Hood sensor connector
AUDIO
Audio connectors
BAT
RTC battery socket
LPT
Parallel port connector
CLR_CMOS
CMOS header
PS2
Legacy keyboard and mouse
connectors
CLR_PASS
Password header
COMB
Serial port connector
SATA2
1st optical drive
SYS_FAN
Fan connector
SATA0
1st hard drive
VGA+COM1
serial connector
SATA1
2nd hard drive
DVI
DVI connector
SATA3
2nd optical drive
LAN+USB
LAN + USB connector
F_PANEL
Front panel connector
USB
USB connectors
F_USB1
1st USB connector
