4.
Lift the cover (3), and then remove the back cover.
Reverse this procedure to install the back cover.
Battery
Description
Spare part number
Battery, 6000 mAH 3.8 V Lithium-Ion Polymer
928848-001
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
Card tray on page 14
).
5.
Remove the back cover (see
Back cover on page 15
).
WARNING!
To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through the operating system before
disconnecting and removing the battery.
Remove the battery:
1.
Remove the 2 M00 x 5.0 Phillips screws (1) securing the battery.
NOTE:
Be careful not to bend the battery as you lift it.
16
Chapter 5 Removal and replacement procedures