Antenna board
Description
Spare part number
Antenna board
926160-001
Before removing the antenna board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
Card tray on page 14
).
5.
Remove the back cover (see
Back cover on page 15
).
6.
Remove the battery (see
Battery on page 16
).
7.
Remove the middle frame cover (see
Middle frame cover on page 17
).
Remove the antenna board:
1.
Remove the Phillips M00x3 screw (1) securing the antenna board.
2.
Open the ZIF connector (2) to release the ribbon cable.
3.
Detach the antenna (3) from the board, and then lift the board (4) to remove it.
Reverse this procedure to install the antenna board.
20
Chapter 5 Removal and replacement procedures