▲
Release the docking charger
(1)
from the metal frame, and then remove it
(2)
.
Reverse this procedure to install the docking charger.
Outer ring
Description
Spare part number
Outer ring for models with WWAN capability
807960-001
Outer ring for models without WWAN capability
807960-001
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 14
).
5.
Remove the battery (see
Battery on page 15
).
6.
Remove the rear-facing webcamera (see
Rear-facing webcamera on page 16
).
7.
Remove the front-facing webcamera (see
Front-facing webcamera on page 17
).
8.
Remove the volume and power button board (see
Volume and power button board on page 19
).
9.
Remove the top and bottom speakers (see
Speakers on page 19
).
10.
Remove the antenna board (see
Antenna board on page 22
).
11.
Remove the connector board (see
Connector board on page 24
).
12.
Remove the system board (see
System board on page 25
).
13.
Remove the docking charger (see
Docking charger on page 26
).
Outer ring
27
