3.
Remove the tape that secures the battery to the back cover
(3)
, and then remove the cover
(4)
.
Reverse this procedure to install the back cover.
Battery
Description
Spare part number
Battery
, 5.53 Ah, USB-charging (includes cable)
798958-001
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 14
).
WARNING!
To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through the operating system before
disconnecting and removing the battery.
Remove the battery:
NOTE:
Disconnect the battery cable carefully; pulling too hard can break the system board connector.
1.
Release the tape
(1)
holding the battery.
Battery
15
Summary of Contents for Pro Slate 8
Page 4: ...iv Safety warning notice ...