Setting Setup Utility (BIOS) passwords
Password
Function
Administrator password
●
Must be entered each time you access Setup Utility
(BIOS).
●
If you forget your administrator password, you cannot
access Setup Utility (BIOS).
Power-on password
●
Must be entered each time you turn on or restart the
tablet.
●
If you forget your power-on password, you cannot turn
on or restart the tablet.
To set, change, or delete an administrator or power-on password in Computer Setup (BIOS):
1.
Turn off the tablet.
2.
Press and hold the power and volume down buttons at the same time until the tablet turns on.
The Startup menu is displayed.
3.
Tap F10 BIOS Setup to enter Computer Setup.
4.
Select Security, and then follow the on-screen instructions.
Your changes take effect when the tablet restarts.
Managing a BIOS administrator password
To set, change, or delete this password, follow these steps:
Setting a new BIOS administrator password
1.
Turn off the tablet.
2.
Press and hold the power and volume down buttons at the same time until the tablet turns on.
The Startup menu is displayed.
3.
Tap F10 BIOS Setup.
4.
Select Security, and then select Setup BIOS Administrator Password.
5.
When prompted, type a password and select Enter.
6.
When prompted, type the new password again and confirm.
7.
To save your changes and exit, select Save, and then follow the on-screen instructions.
Your changes go into effect when the tablet restarts.
Changing a BIOS administrator password
1.
Turn off the tablet.
2.
Press and hold the power and volume down buttons at the same time until the tablet turns on.
The Startup menu is displayed.
3.
Tap F10 BIOS Setup.
4.
Select Security, and then select Change Password.
Using passwords 27
Summary of Contents for Pro Tablet 608 G1
Page 1: ...User Guide ...
Page 4: ...iv Safety warning notice ...
Page 6: ...vi Processor configuration setting select models only ...
Page 10: ...x ...
