Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
766617-001
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 39
).
5.
Disconnect the tablet battery cable from the system board (see
Tablet battery on page 44
).
6.
Remove the tablet I/O board (see
Tablet I/O board on page 59
).
Remove the speakers:
1.
Remove the three Philllips PM1.5×3.5 screws
(1)
that secure the left and right speakers to the tablet
frame.
2.
Remove the Philllips PM2.4×4.4 screw
(2)
that secures the left speaker to the tablet frame.
3.
Remove the speakers
(3)
.
Reverse this procedure to install the speakers.
Tablet replacement procedures
63
Summary of Contents for Pro x2 612 G1
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
