background image

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.

NOTE:

Some of the Computer Setup menu items listed in this chapter may not be supported by

your computer.

File menu

Select

To do this

System Information

View identification information for the computer and the
batteries in the system.

View specification information for the processor, cache
and memory size, system ROM, video revision, and
keyboard controller version.

Set System Date and Time

Set or change the date and time on the computer.

Restore defaults

Replace the configuration settings in Computer Setup with
the original factory settings. (Hard drive mode, password
settings, and security settings are not changed when you
restore the factory settings.)

Ignore changes and exit

Cancel any changes entered during the current session.
Then exit and restart the computer.

Save changes and exit

Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect
when the computer restarts.

118 Chapter 5   Computer Setup

Summary of Contents for ProBook 4320s

















































































































































































Reviews: