Display assembly
All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2
WWAN antenna transceivers and cables.
Description
Spare part number
Display assembly, 33.8-cm (13.3-inch) HD, anti-glare
684251-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 40
).
5.
Remove the following components:
a.
Bottom door (see
Bottom door on page 42
).
b.
WLAN module (see
WLAN/Bluetooth combo card on page 52
)
c.
WWAN module (see
WWAN module on page 50
)
d.
Keyboard (see
Keyboard on page 54
)
e.
Top cover (see
Top cover on page 56
)
f.
Speakers (see
Speaker assembly on page 68
)
Remove the display assembly:
1.
Position the computer upside down.
2.
Remove the WLAN and WWAN antennas from the routing path
(1)
on the bottom of the
computer.
Component replacement procedures
79
