Hard drive
Table 5-7
Hard drive descriptions and part numbers
Description
Spare part number
Hard drive, 1 TB, 7200 rpm, 9.5 mm
766644-002
Hard drive, 1 TB, 5400 rpm, 7 mm
832077-002
Hard drive, 500 GB, 7200 rpm, 7 mm
703267-002
Hard drive, 1 TB, 5400 rpm, 7 mm
832077-002
Hard Drive Hardware Kit (includes hard drive cover and connector)
L44510-001
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 33
2.
Place the computer in Battery Safe mode (
3.
Remove the bottom cover (
).
4.
Remove the battery (
Remove the hard drive:
1.
Release the ZIF connector (1), and then disconnect the hard drive cable from the system board (2).
2.
Remove the two Phillips M2.0 × 4.0 screws (3) that secure the hard drive to the computer.
3.
Use the tab (4) to lift the hard drive from the bay (5).
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for ProBook 440 G7
Page 4: ...iv Safety warning notice ...