Keyboard
NOTE:
For a detailed list of available keyboards, see
Sequential part number listing on page 29
.
Description
Spare part number
Keyboard for use in models using Windows 7
683657-xxx
Keyboard for use in models using Windows 8
702238-xxx
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 38
).
5.
Remove the bottom door (see
Bottom door on page 39
).
6.
Remove the hard drive (see
Hard drive on page 43
).
7.
Remove the memory (see
Memory modules on page 45
).
Remove the keyboard:
1.
Position the computer upside-down with the front toward you.
2.
Remove the two Phillips PM2.5×6.0 screw
(1)
that secure the keyboard to the computer.
3.
Position the computer right-side up with the front toward you.
4.
Open the computer as far as possible.
5.
Grasp the keyboard and slide it towards the front of the computer
(1)
to release its catches.
Component replacement procedures
49
