8.
If you need to remove the hinge covers from the display hinges, pull the hinges straight up and
off the display to remove them.
Display hinge covers are available in the Display hinge kit, spare part number 683643-001.
9.
To replace the display bezel, remove the two rubber screw covers
(1)
and the two Phillips
PM2.5×4.0 screws
(2)
in the bottom corners of the display bezel.
10.
Flex the top
(3)
of the bezel, the inside edges of the left and right sides
(4)
, and then the bottom
(5)
of the bezel until it disengages from the display enclosure.
80
Chapter 4 Removal and replacement procedures
