Memory modules
Table 5-3
Memory module description and part number
Description
Spare part number
8 GB
937236-855
4 GB
L10598-855
IMPORTANT:
Before adding new memory, make sure you update the computer to the latest BIOS from
Failure to update the computer to the latest BIOS prior to installing new memory may result in various system
problems.
Before removing the memory module, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 34
).
2.
Place the computer in “Battery Safe mode” (
3.
Remove the bottom cover (
4.
Remove the battery (
).
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
2.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
Memory modules are designed with a notch to prevent incorrect insertion into the memory
module slot.
Reverse this procedure to install a memory module.
Component replacement procedures
37
