M.2 solid-state drive
Table 5-5
Solid-state drive description and part number
Description
Spare part number
512 GB, PCIe, TLC
L52220-001
256 GB, PCIe
L52219-001
128 GB, SATA-3, TLC
L52218-001
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 34
2.
Place the computer in “Battery Safe mode” (
).
3.
Remove the bottom cover (
).
4.
Remove the battery (
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the computer.
2.
Remove the solid-state drive (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
40
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts