Fingerprint sensor assembly
Table 6-6
Fingerprint sensor assembly description and part number
Description
Spare part number
Fingerprint sensor assembly
L44516-001
Fingerprint sensor bracket (included in Bracket Kit)
L44586-001
Fingerprint sensor cable (included in the Cable Kit)
L52216-001
Fingerprint sensor insert (included in Plastics Kit; for use in models without a fingerprint sensor)
L44551-001
Before removing the fingerprint sensor assembly, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 34
).
2.
Place the computer in “Battery Safe mode” (
3.
Remove the following components:
a.
Bottom cover (
b.
Battery (
).
c.
Hard drive (
Remove the fingerprint sensor assembly:
1.
Disconnect the cable from the ZIF connector on the fingerprint sensor (1).
2.
Slide the bracket toward the inside of the computer, and then lift it off the fingerprint sensor board (2).
TIP:
A tool may be required to push and disengage the bracket.
Component replacement procedures
51