Hard drive
Table 5-6
Hard drive description and part number
Description
Spare part number
Hard drive, 1 TB, 5400 rpm, 7 mm
L30422-001
Hard drive, 500 GB, 7200 rpm, 7 mm
703267-001
Hard Drive Hardware Kit (includes hard drive cover and connector)
L44510-001
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 34
).
2.
Place the computer in “Battery Safe mode” (
3.
Remove the bottom cover (
4.
Remove the battery (
).
Remove the hard drive:
1.
Release the ZIF connector (1), and then disconnect the hard drive cable from the system board (2).
2.
Remove the two Phillips M2.0 × 4.0 screws (3) that secure the hard drive to the computer.
3.
Use the tab to lift the hard drive from the bay (4).
Component replacement procedures
41
