Inserting a SIM card (select products only)
CAUTION:
To prevent damage to the connectors, use minimal force when inserting a SIM card.
To insert a SIM card, follow these steps:
1.
Turn off the computer by using the Shut down command.
2.
Close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the battery bay toward you.
6.
Remove the battery.
7.
Remove the smaller service door.
8.
Insert the SIM card into the SIM card slot, and then press in on the SIM card until it is firmly seated.
NOTE:
See the image below to determine which way the SIM should be inserted into your computer.
9.
Replace the service door.
10.
Insert the battery.
NOTE:
HP Mobile Broadband will be disabled if the battery is not replaced.
11.
Reconnect external power.
12.
Reconnect external devices.
13.
Turn on the computer.
To remove a SIM card, press in on the SIM card, and then remove it from the slot.
Inserting a SIM card (select products only)
29