Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-6
Solid-state drive descriptions and part numbers
Description
Spare part number
1 TB, PCIe, TLC
L85348-002
1 TB, locked
M31024-001
512 GB, PCIe, value
L85364-002
512 GB solid-state drive + 32 GB Optane memory
L85366-002
256 GB, PCIe, value
L85354-002
128 GB, PCIe, TLC
M06792-002
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 30
2.
Remove the bottom cover (
).
3.
Disconnect the battery cable from the system board (see
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2.
Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for ProBook 450 G8
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...