2.
Remove the speakers from the computer (2) .
Reverse this procedure to install the speakers.
Power connector cable
To remove the power connector cable, use this procedure and illustration.
Table 5-15
Power connector cable description and part number
Description
Spare part number
Power connector cable
M21725-001
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 30
).
2.
Remove the bottom cover (
3.
Disconnect the battery cable from the system board (see
Remove the power connector cable:
1.
Remove the two Phillips M2.5 × 4.0 screws (1) that secure the right display hinge to the computer, and
then rotate the hinge off the power connector (2).
2.
Remove the Phillips M2.0 × 4.0 screw (3) that secures the power connector to the computer.
3.
Disconnect the cable from the system board (4).
Component replacement procedures
49
Summary of Contents for ProBook 450 G8
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...