background image

7  Backing up, restoring, and recovering ...........................................................................................................  63

Backing up information and creating recovery media ........................................................................................  63

Using Windows tools for backing up ................................................................................................. 63
Using the HP Cloud Recovery Download Tool to create recovery media (select products only) .....  63

Restoring and recovering your system ...............................................................................................................  63

Creating a system restore .................................................................................................................  64
Restoring and recovery methods ...................................................................................................... 64
Recovering using HP Recovery media ............................................................................................... 64
Changing the computer boot order ................................................................................................... 64
Using HP Sure Recover (select products only) ..................................................................................  65

8  Using HP PC Hardware Diagnostics ................................................................................................................  66

Downloading the HP PC Hardware Diagnostics Windows from the Microsoft Store .......................................... 66
Customizing Remote HP PC Hardware Diagnostics UEFI settings ......................................................................  66

9  Specifications .............................................................................................................................................. 67

Computer specifications ......................................................................................................................................  67
39.6 cm (15.6 in) display specifications ..............................................................................................................  67
Solid-state drive specifications ........................................................................................................................... 68

10  Statement of memory volatility .................................................................................................................. 70

Current BIOS steps ............................................................................................................................................... 70
Nonvolatile memory usage .................................................................................................................................  72
Questions and answers .......................................................................................................................................  74
Using HP Sure Start (select products only) .........................................................................................................  75

11  Statement of memory volatility .................................................................................................................. 76

Current BIOS steps ............................................................................................................................................... 76
Nonvolatile memory usage .................................................................................................................................  78
Questions and answers .......................................................................................................................................  80
Using HP Sure Start (select products only) .........................................................................................................  81

12  Power cord set requirements ......................................................................................................................  82

Requirements for all countries ............................................................................................................................ 82
Requirements for specific countries and regions ................................................................................................ 82

13  Recycling ..................................................................................................................................................  84

Index .............................................................................................................................................................  85

vii

Summary of Contents for ProBook 450 G8
































































































Reviews: