7.
To replace the display bezel, remove the two rubber screw covers
(1)
and the two Torx
T8M2.5×6.0 screws
(2)
in the bottom corners of the display bezel.
8.
Flex the top
(3)
of the bezel, the inside edges of the left and right sides
(4)
, and then the bottom
(5)
of the bezel until it disengages from the display enclosure.
The bezel is available using the following spare part numbers:
646265-001: models without a webcam
646266-001: models with a webcam
9.
Remove the display bezel.
92
Chapter 4 Removal and replacement procedures
