8.
Insert a screwdriver through the holes in the battery bay and press to disengage the top cover
from the computer.
9.
Position the computer upright with the front toward you.
10.
To remove the top cover, pull up on the top of the top cover
(1)
, pull upward on the left
(2)
and
right sides
(3)
, and then lift the bottom of the top cover
(4)
to remove it enough to access the
card reader cable underneath.
11.
Lift the front of the top cover slightly to gain access to the cable and connector underneath.
62
Chapter 4 Removal and replacement procedures
