USB board
Description
Spare part number
USB board
646287-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
).
5.
Remove the following components:
a.
Bottom door (see
Bottom door on page 43
).
b.
Optical drive (see
Optical drive on page 44
)
c.
Keyboard (see
Keyboard on page 57
)
d.
Top cover (see
Top cover on page 59
)
Remove the USB board:
1.
Position the computer upright with the front toward you.
2.
Lift the system board connector latch
(1)
, and then disconnect the USB board cable from the
system board
(2)
.
3.
Remove the two Phillips PM2.5×5.0 screws
(3)
that secure the USB board to the computer.
Component replacement procedures
73
