background image

Table 2-5

Special keys and their descriptions

Component

Description

(1)

esc

 key

Displays system information when pressed in combination with 

the 

fn

 key.

(2)

Windows key

Opens the Start menu.

NOTE:

Pressing the Windows key again will close the Start 

menu.

(3)

Action keys

Execute frequently used system functions.

(4)

Power key

When the computer is off, press the key briefly to turn on 

the computer.

When the computer is on, press the key briefly to initiate 

Sleep.

When the computer is in the Sleep state, press the key 

briefly to exit Sleep (select products only).

When the computer is in Hibernation, press the key briefly

 

to exit Hibernation.

IMPORTANT:

Pressing and holding down the power key results 

in the loss of unsaved information.

If the computer has stopped responding and shutdown 

procedures are ineffective, press and hold the power key for at 

least 4 seconds to turn off the computer.

To learn more about your power settings, use the Power icon.

Right-click the Power icon 

 and then, depending on 

your product, select Power and sleep settings or Power 

Options.

Special keys

9

Summary of Contents for ProBook Fortis G10





















































































Reviews: