2.
Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
RTC battery
To remove the RTC battery, use this procedure and illustration.
Table 5-5
RTC battery description and part number
Description
Spare part number
RTC battery
L43797-001
Before removing the RTC battery, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 28
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the RTC battery:
1.
Disconnect the battery cable from the system board (1).
2.
Remove the tape that secures the cable to the computer (2).
RTC battery
33