5.
Lift the left side of the system board up, and then pull the board to the left to remove it from the
computer (4).
To install the system board, reverse this procedure.
Display assembly
To remove and disassemble the display assembly, use these procedures and illustrations.
Before removing the display panel, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 28
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the display assembly:
1.
Disconnect the following cables from the system board:
(1) WLAN antennas
(2) Camera cable
(3) Display cable
42
Chapter 5 Removal and replacement procedures for authorized service provider parts