4.
Remove the speaker from the computer (4).
To install the speakers, reverse this procedure.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-8
Touchpad description and part number
Description
Spare part number
Touchpad
N00689-001
Touchpad cable (in Cable Kit)
N20852-001
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 28
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad:
1.
Remove the six Phillips M2.0 × 2.5 screws (1) that secure the touchpad bracket to the computer.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts