6-18
Interface Access, System Information, and Friendly Port Names
Using Friendly (Optional) Port Names
Displaying Friendly Port Names with Other Port Data
You can display friendly port name data in the following combinations:
■
show name
: Displays a listing of port numbers with their corresponding
friendly port names and also quickly shows you which ports do not have
friendly name assignments. (
show name
data comes from the running-
config file.)
■
show interface <
port-number
>
: Displays the friendly port name, if any, along
with the traffic statistics for that port. (The friendly port name data comes
from the running-config file.)
■
show config
: Includes friendly port names in the per-port data of the
resulting configuration listing. (
show config
data comes from the startup-
config file.)
To List All Ports or Selected Ports with Their Friendly Port Names.
This command lists names assigned to a specific port.
Syntax:
show name [
port-list
]
Lists the friendly port name with its
corresponding port number and port type.
The
show name
alone command lists
this data for all ports on the switch.
For example:
Figure 6-11. Example of Friendly Port Name Data for All Ports on the Switch
Friendly port names
assigned in previous
examples.
Ports Without
"Friendly" Name
Summary of Contents for ProCurve 4104GL
