13-17
802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)
Configuring Rapid Reconfiguration Spanning Tree (RSTP)
Figure 13-4. Example of the RSTP Configuration Screen
7.
Press the
[Tab]
key or use the arrow keys to go to the next parameter you
want to change, then type in the new value or press the Space bar to select
a value. (To get help on this screen, press
[Enter]
to select the
Actions –>
line,
then press
[H]
, for
Help
, to display the online help.)
8.
Repeat step 6 for each additional parameter you want to change.
Please see “Optimizing the RSTP Configuration” on page 13-9 for recom-
mendations on configuring RSTP to make it operate the most efficiently.
9.
When you are finished editing parameters, press
[Enter]
to return to the
Actions –>
line and press
[S]
to save the currently displayed spanning tree
settings and return to the Main Menu.
10. If you have changed the Protocol Version, in step 1, reboot the switch now
by selecting
6. Reboot Switch
Summary of Contents for ProCurve 4104GL
