System Configuration
Quarantining, 802.1X
3-68
8.
Enter the
Password
with which to log into the device's console.
9.
Re-enter the console password.
10. Enter the
Cisco port mask
in the text field. This specifies which characters
within the endpoint identifier returned by the Cisco device contain the
bank and port information of the endpoint. All offsets start at 0, so a mask
of 2/34 indicates character 3 for the bank and characters 4 and 5 for the
port. If the Cisco device were to return 50210 for an endpoint, a port mask
of 2/34 would indicate that the endpoint is on bank 2 and port 10 (2/10),
where 210 are the third, fourth and fifth bytes in the identifier.
11. Enter the
Reconnect idle time
. This is the amount of time in milliseconds
that a Telnet/SSH console can remain idle or unused before it is reset.
12. Select the
Show scripts
plus symbol to show the following scripts:
•
Initialization script
– The expect script used to log into the console and
enter enable mode.
•
Re-authentication script
– The expect script used to perform endpoint
re-authentication.
•
Exit script
– The expect script used to exit the console.
13. Click
ok
.
TIP:
Click revert to defaults to restore the default settings.
Cisco CatOS
To add a Cisco CatOS device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button>>Add an 802.1X device
Summary of Contents for ProCurve NAC 800
