3
Introduction
The ProCurve Radio Port 230 and ProCurve Radio Port 210, components of the ProCurve Wireless LAN System, link
wireless 802.11a/b/g devices to the Ethernet network through a wireless services-enabled switch. These devices are
to be used with the HP ProCurve Switch 5300xl with a ProCurve Wireless EDGE Services xl Module or other
compatible wireless services-enabled switch products. These Radio Ports are designed to be simple plug-and-play
devices that require no individual device configuration before being installed into a network. All Radio port
configurations, including country-specific settings, radio channels, radio power, SSID settings, security settings,
management information, and Radio Port firmware is provided through the wireless services-enabled switch.
NOTE: Before installing Radio Ports, a ProCurve wireless services-enabled switch (such as the ProCurve Switch
5300xl with Wireless EDGE Services xl Module installed) should be deployed, configured and operating in a Normal
mode. See the “ProCurve Wireless EDGE Services xl Module Getting Started Guide” for details.
ProCurve Radio Port 230 and 210 Package Contents
• ProCurve Radio Port 230 or Radio Port 210
• Two wall mount screws
• Two wall anchors
• Radio Port Install Guide
• Customer Support/Warranty booklet
Description
The ProCurve Radio Port 230 is a dual-radio IEEE 802.11-compliant device supporting simultaneous 802.11a and b/g
wireless Ethernet connections. It contains two embedded 802.11 b/g (2.4 GHz) omni directional diversity antennas,
and two embedded 802.11a (5.4 GHz) omni directional diversity antennas.
The ProCurve Radio Port 210 is a single radio IEEE 802.11-compliant device supporting 802.11 b/g wireless Ethernet
connections. It contains two embedded 802.11 b/g (2.4 GHz) omni directional diversity antennas.
Both Radio Ports are designed for installation in office environments, either using the wall mount or suspended-
ceiling T-Bar mountings built into the underside of the plastic case. Each Radio Port has one RJ-45 connector
supporting 10/100 Ethernet and requires power from any UL-listed, 802.3af-compatible Power over Ethernet (PoE)
switch or power injector.
Technical Specifications
Dimensions & Weight
Features
• High-performance 802.11-compliant radios
Operating Voltage
48VDC (from 802.3af-compliant power source)
Operating Current
148mA (typical)
Power
7W (typical)
Operating Temperature
32 to 104° F (0 to 40° C)
Non-Operating/Storage Temperature
-40°F to 158°F (-40 to 70°C )
Operating Humidity
5 to 95% (non-condensing)
Non-Operating/Storage Humidity
5 to 95% (non-condensing)
Operating Altitude (max)
10,000 ft (3,048 m)
Non-Operating/Storage Altitude
15,000ft.(4,572 m)
Length
249.2mm (9.81in.)
Width
174.9mm (56.88in.)
Height
42.4mm (1.67in.)
Radio Port 230 Weight
0.55kg (1.214lbs)
Radio Port 210 Weight
0.50kg (1.096lbs)
