background image

Read Me First 

for the HP ProCurve Series 4100gl Switches – Software Version G.07.xx 

Contents 

About Your HP ProCurveProCurve Series 4100gl Switch Manual Set . . . . . . . . . . . . . . . . . . . . . .

page 1 

Software Updates

 . . . . . . . . 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

page 2 

Your Ticket to Proactive Networking!

 . . . . 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

page 2 

Saving the Configuration After Installing or Exchanging a Module . . . . . . . . . . . . . . . . . . . . . . . .

page 3 

Transceiver Operation Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

page 4 

mini-GBIC Operation Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

page 6 

Using Trunking with the Gig-T/GBIC gl ModuleStack Management Issue  . . . . . . . . . . . . . . . . . .

page 7 

Time Zone Issue  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

page 8 

About Your HP ProCurve Series 4100gl Switch Manual Set 

The switch manual set includes the following: 

Document 

Available on the HP 

ProCurve Web Site 

Shipped With 

the Switch 

Read Me First

 (this document)

Yes 

Hardcopy 

Installation and Getting Started Guide

Yes 

Hardcopy and CD

Management and Configuration Guide

Yes 

CD

Access Security Guide

Yes 

CD

Release Notes (for software updates)

 1 

Yes 

CD

1

The latest edition is always available in PDF format and downloadable at 

http://www.hp.com/go/hpprocurve

2

The 

Product Documentation CD-ROM

 shipped with your switch. 

How To Read or Print Manuals Included On the CD-ROM 

To access manuals included on the CD (in PDF format), use the Adobe® Acrobat® Reader. For PCs, 
you will need version 4.0 (or greater) of the Reader. If you do not already have this version on your 
PC, you can download it from the Adobe web site at 

http://www.adobe.com

For MAC and UNIX® Platforms. 

You can download a Reader from the Adobe web site at 

http://www.adobe.com

Summary of Contents for ProCurve Series









Reviews: