Front I/O assembly
Description
Spare part number
Front I/O assembly
732750-001
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 37
).
2.
Remove the access panel (
Access panel on page 38
).
3.
Remove the front bezel (
Front bezel on page 40
).
4.
Disconnect the three front I/O cables from the following system board connectors:
{
FRONT USB
{
MEDIA 3.0
{
FRONT AUD
5.
Remove the Torx T15 screw that secures the assembly to the chassis
(1)
.
6.
Rotate the right side of the assembly outward
(2)
.
7.
Pull the assembly away from the computer while threading the wires through the hole in the front
of the chassis.
To reinstall the assembly, reverse the removal procedure.
Front I/O assembly
67