Front bezel security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 85
).
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the access panel (
Access panel on page 86
).
4.
Remove the front bezel (
Front bezel on page 87
).
5.
Remove one of the five silver 6-32 standard screws located on top of the drive cage.
88
Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)