Hardware options installation 44
10.
Install the TPM board. Press down on the connector to seat the board ("
System board components
" on
page
8
).
11.
Install the TPM security rivet by pressing the rivet firmly into the system board.
12.
Install the front panel/drive cage assembly.
13.
Install the DIMM baffle.
14.
Install the SAS controller (on page
15
).
15.
Install the access panel (on page
14
).
16.
Install the server blade ("
Installing a server blade
" on page
21
).
17.
Power up the server blade (on page
12
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.
