Removal and replacement procedures 26
DIMM baffle
CAUTION:
To avoid damage to the server blade and the enclosure, install all DIMM baffles in
the proper location after adding or replacing DIMMs. DIMM baffles that are missing or installed
incorrectly can compromise server blade and enclosure cooling.
To remove the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Remove the access panel ("
" on page
4.
Disconnect the cables, and then remove the DIMM baffle.
5.
Remove the remaining DIMM baffle.
To replace the component, reverse the removal procedure.
DIMMs
CAUTION:
Use only HP DIMMs. DIMMs from other sources may adversely affect data integrity.
To remove the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Remove the access panel ("
" on page
4.
Remove all DIMM baffles ("
" on page
